Turntable

Performance indicators of hollow turntable KDZT200-18W 

1. Two small holes with the 2-M2.5 on the turntable bearing, equipped with a photoelectric switch as the zero point control of the turntable.

2. The parallelism between the installation surface of the turntable and the upper end face of the bearing is ≤ 0.01mm; Perpendicularity with the rotation center of the bearing ≤ 0.01mm.

3. The surface hardness of flat gears and small gears should be within the range of HRC58-62; The accuracy is between levels 4 and 5. 

4. According to the requirements of user, tooth surface grinding should be carried out if necessary.

4. During assembly, the gear center distance can be adjusted by adjusting the screws to reduce the tooth side clearance, achieving a repeatable positioning accuracy of less than 15 seconds.

5. Rated output torque: 55N. m; Output torque (MAX): 165N. m.

6. Turntable speed ≤ 200rpm, servo motor: 750W; Stepper motor: 86-110w.

7. Allowable axial load is 4000N; The allowable inertial force distance is 100N. m. Torsional rigid force distance is 32N. m.

8. Tooth clearance: adjustable to 0 side clearance.

9. Precision life: Continuous operation ≥ 30000 hours. Intermittent operation ≥ 60000 hours.

10. Transmission efficiency ≥ 95%.

11. Noise ≤ 63db.

12. Weight: 9.37kg.

13. Load bearing: 80kg

                                           Technical Parameter

Notice: The above parameters are for reference only. Based on the data provided by the customer, relevant technical parameters and dimensions will be provided.